AKASO V1 Manual Del Usuario página 4

④ The built-in battery is only used to power the "parking monitor" function.
In normal use, please plug the car charger into the cigarette lighter of the car to power
the dash cam. The built-in battery is not recommended as a normal use of power
supply to the dash cam, in order to avoid the battery no power when parking, and
cause the parking monitoring function to fail.
⑤ The camera can be powered by connecting the phone adapter 5VDC with the USB
Cable to plug into a power outlet.
When charging, please shut down the camera by long press the power button.
Tips:
① Blue light flash means the camera is recording.
② Red light means the camera is charging.
③ The green icon on screen is flashing that means GPS is unsuccessful positioning,
when this icon doesn't flash that means GPS is Positioning success.
PLAYBACK VIDEOS
1. Playback Videos on Dash Camera
Enter the playback interface, there are videos with or without lock.
Locked videos are videos of emergency recording and parking monitor; Unlocked videos
are the normal videos.
① After turning on the camera, press
02:02:56
1080FHD
03
to stop recording.
② Press to enter the playback interface to play videos which is stored on the card.
02:02:56
720P
07/27/2019 11:27:36
③ Press / to choose the video you want to play (the yellow arrow shown on which
video means that video is chose), then press
2. Unlocked videos to playback
1
1080P
2
07/23/19
3
15:33
2019 0723 153343 001.MOV 4
5 6 7
The recorded video's resolution
1
2 The recorded video's date
The recorded video's time
3
The recorded video's file number
4
Back to the playback interface
5
to play the video.
9
00:00:01
07/23/19
2019 0723 153343 001.MOV
8
Unlock/Lock video
6
Delete video
7
Play current video
8
9 The time schedule of video playing
Pause current video's playing
10
2/3
15:33
10
04