Hatco SERV-RITE SRB Serie Manual De Instalación Y Operación página 10

OPeRAtiON
NOTE: For SRGBW-1 and SRSSBW models; heat generated
by the overhead heat lamps is absorbed by the glass or
stone surface of the heated shelf during the preheat
cycle. This causes the temperature shown on the
display to rise past the setpoint temperature. The
display will return gradually to the setpoint temperature
once a pan or food product is placed on the glass
surface.
Shutdown
NOTE: For SRBW-1, SRGBW-1, and SRSSBW-1 models: If
the LIGHTS ON/OFF (I/O) switch or the optional
dimmer switch is left in the ON (I) position when the
Power ON/OFF (I/O) switch is moved to the OFF (O)
position, the lights will shut off as well. The lamps will
turn on immediately the next time the Power ON/OFF
(I/O) switch is moved to the ON (I) position.
LIGHTS
ON/OFF
(I/O) Switch
Changing the Setpoint temperature
NOTE: SRB and SRG series have a digital temperature
Locking/Unlocking the Digital temperature
Controller
Digital Temperature
Controller
controller with a maximum setpoint temperature setting
of 104°C (220°F), but the maximum operating
temperature of the unit is 93°C (200°F). A temperature
setting above 93°C (200°F) will not harm the unit.
SRSS-1 and SRSSBW-1 models have a maximum
setpoint temperature setting of 90°C (195°F).
Power ON/OFF
(I/O) Switch