Honeywell MILLER Turbo T-BAK Personal Fall Limiter Manual De Instrucciones Para El Usuario página 12

Fig. 8b
Add 3 ft (0.9m) of fall clear-
ance to calculation if user
may be working in a crouched
or kneeling position.
Add 5 ft. (1.5m) of fall clear-
ance if user may be working
in a lying down position.
Worker must not be exposed
to a swing fall hazard.
Us er In stru ctio ns - Engli sh
Fig. 8d
please contact Honeywell Technical Services:
12
Fig. 8c
Whenever a worker may not be working
directly under the anchor point or may be
moving back and forth from the vertical of
the unit, the swing fall factor must be in-
cluded in the fall clearance calculation. Fall
clearance distance will increase according
Honeywell Technical Services can help you
calculate the added fall clearance required...
call 1-800-873-5242 (press 4).
If there is any question
about calculating fall clearance distance,
Fig. 8a