Fasten The Finger Protection; Attaching The Covers - Bosch B36ET71SNS Instrucciones De Instalación


Insert the cover strip into the space between the
appliance and the wooden panel.

Re-insert the drawer.
To re-insert, lift the front of the drawer slightly and insert
into the telescopic rails. Lower the drawer and push
back.

19. Fasten the finger protection

On both doors of the refrigerator compartment:

Insert finger guard into the gap between appliance and
cavity wall (1.).

Press cover strip of the finger guard from top to bottom
into the gap between the furniture front and appliance
door (2.). Ensure that the fixing holes in the cover strip
are in alignment with the bores in the fixing brackets (3.)!

Attach finger guard to the fixing brackets using the
screws.

Check function and ease of movement of the finger
guard by opening and closing the door several times.

20. Attaching the covers


Press cover strips on the handle sides of the doors into
the gap between stainless steel front and appliance
door.

Press cover strips on the freezer compartment drawer
into the gap between stainless steel front and drawer.
23