Troubleshooting - Insignia NS-19RTR Guia Del Usuario

NS-19RTR 19" DVD Triple Combo

Troubleshooting

General
Problem
No power
Remote control does
not work
TV/VCR Mode
Problem
Poor or no picture when
watching TV
Possible solution
• Make sure that the power plug is
connected to an AC outlet.
• If power has failed, check the breaker.
• Replace the batteries. Make sure that
you match the + and – symbols in the
battery compartment.
• Make sure that you aim the remote
control at the remote sensor. The
operable range of the remote control is
between 10 feet (3 m) and 23 feet (7 m)
depending on the angle.
• Remove all obstacles to clear the path of
the infrared signal.
• Check the infrared signal output.
• Press the INPUT button to select the
correct video mode.
Possible solution
• Make sure that the antenna is connected
correctly.
• Check the antenna cable for bent or
broken pins. If necessary, replace the
cable.
• Check for sources of reception
interference.
• Press the INPUT button to select the
correct video mode.
• Scan for available TV channels.
• Try another TV channel. If reception is
good, there may be a problem with the
original station's broadcast signal.
• Adjust picture controls, such as color,
contrast, and brightness.
• Make sure that there are no appliances
nearby that generate a magnetic field.
Turn off or relocate the appliance.
• Try degaussing. For more information,
see "Degaussing" on page 48.
www.insignia-products.com 51