Technical Specifications - Facom X.740 Guía De Instrucciones

Lampara estroboscopica para reglaje de motores diesel
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

GB
GB
A
i
XRD.740
u
g
f
k
4
1
3
2
4
o
p
t
h
j
z

Technical specifications

Dimensions
: 305 x 275 x 110 mm
Weight
: 1,635 kg
Std.equipment : 1 stroboscopic lamp and cables a
: probe for injector pipe, Ø6
: 50 cm cable with 2 crocodile clips e
: 2 x 2 amp fuses r
: stamped addressed card to be returned
to us to obtain the diesel specifications manual
: one year warranty booklet
: instruction manual supplied in a case
(reference X.740BV)
Options
: probe for injector pipe Ø4.5
: probe for injector pipe Ø8
Test
Scale
Tachometer
0 to 9990 RPM
Ign. advance
0 to 99.9°
D.C. voltmeter
0 to 60 V
Peak voltmeter
0 to 60 V
Safety : This lamp only works on 12 volts
different voltages use an auxiliary battery and connect its «-» terminal to
.
the vehicle ground)
It is important to respect the position of the probe z
specified in the
XRD.740
place it as close as possible to the injector. The probe
should be placed on the no 1 cylinder injector pipe on a
straight section which is not distorted or scratched, and is
free from grease or paint.
Operation
A1) Connections
Connect the lamp to the power supply by placing the
large red clip of cable h on the «+» battery terminal
and the black clip on the «-» terminal.
Place the probe z round the N° 1 injector pipe. Connect
the fork terminal of cable j on the spring connector of
probe z and connect the black clip on this wire to the
engine ground.
A2) To test engine speed
idle, fast idle and maximum speeds. Start the engine,
switch on the stroboscopic function lamp p by pressing
key t and read the engine speed on display u.
If necessary adjust the speeds as explained in the diesel
manual
XRD.740
or the manufacturer's manual.
A3) To test the initial ignition timing : Find the
window for the TDC mark on the clutch housing. If the
vehicle does not have a window, use one of the methods
described in «B» or «C»
X.740-3
(XRD.740)
(X.740-1)
(X.740-2)
Resolution
± 10 RPM
± 0,1°
± 0,1 V
± 0,1 V
(for vehicles with
manual. If this is not possible
. To check the
(tachometer)
z

Publicidad

Tabla de contenido
loading

Tabla de contenido