Service Safety; Dimensions - Wacker PT2A Manual De Operación

1A OPERATION
1.5

Service Safety

Poorly maintained equipment can become a safety hazard! In order for the equipment to operate safely and properly
over a long period of time, periodic maintenance and occasional repairs are necessary.
DO NOT attempt to clean or service pump while it is
running. Rotating parts can cause severe injury.
DO NOT crank a flooded engine with the spark plug
removed on gasoline-powered engines. Fuel trapped
in the cylinder will squirt out the spark plug opening.
DO NOT test for spark on gasoline-powered en-
gines, if engine is flooded or the smell of gasoline is
present. A stray spark could ignite fumes.
DO NOT use gasoline or other types of fuels or
flammable solvents to clean parts, especially in en-
closed areas. Fumes from fuels and solvents can
accumulate and become explosive.
1.6

Dimensions

1A-4
!
in. (mm)
20 (510)
WARNING
ALWAYS operate pump with all safety devices and
guards in place and in working order.
ALWAYS keep area around muffler free of debris
such as leaves, paper, cartons, etc. A hot muffler
could ignite them, starting a fire.
ALWAYS replace worn or damaged components
with spare parts designed and recommended by
WACKER for servicing this machine.
ALWAYS remove or disconnect spark plug on pumps
equipped with gasoline engines, before servicing
pump, to avoid accidental start-up.
ALWAYS handle impeller carefully. The impeller can
develop sharp edges which can cut.
24 (610)
PT2A
22 (560)
1033SD52
1