Scott Sport SCOTT Manual Del Usuario página 7

N
• ALL CHINSTRAP: ALL LIABILITY CLAIMS BASED UPON NON-OBSERVANCE OF THE INSTRUCTIONS FOR FITMENT
AND USE EXPLAINED IN POINT 3 ARE PRECLUDED.
• IV. FIT SYSTEM ADJUSTMENT
SCOTT INCLUDES A HELMET FIT SYSTEM ON CERTAIN MODELS TO ENSURE THE HELMET FITS PROPERLY AND IS
HELD SECURELY AND COMFORTABLY ON YOUR HEAD SCOTT OFFERS DIFFERENT FIT SYSTEMS ON DIFFERENT
HELMETS. IF YOUR HELMET IS EQUIPPED WITH A FIT SYSTEM, BELOW YOU WILL FIND INSTRUCTIONS ON HOW
TO ADJUST IT CORRECTLY TO ACHIVE A PERFECT FIT.
• ALL FIT SYSTEMS: TURN THE DIAL ON THE BACK OF THE FIT SYSTEM CLOCKWISE TO ATTAIN A SMALLER SNUG-
GER HELMET FIT (R) AND COUNTERCLOCKWISE TO INCREASE THE SIZE OF THE FIT (S). AFTER ADJUSTING THE
FIT SYSTEM THE HELMET SHOULD FIT YOUR HEAD SECURELY AND COMFORTABLY.
HEIGHT ADJUSTMENT OF THE SOLO AND MRAS FIT
SYSTEMS
FIND YOUR HELMET AND FIT SYSTEM AT WWW.SCOTT-SPORTS.COM OR HELMET BOX.
HEIGHT ADJUSTMENT OF THE REAR OF THE FIT SYSTEM IS A GREAT WAY TO ACHIEVE A PERFECT FIT. THE
FACTORY POSITION IS GOOD FOR THE MAJORITY OF USERS, HOWEVER SOME RIDERS MAY FIND ONE OF THE
OTHER TWO POSITIONS WORKS BETTER FOR THEM. ADJUSTING THE HEIGHT AT THE REAR CAN ALSO ADJUST
THE HEIGHT OF THE FRONT OF THE HELMET ON THE HEAD.
• MRAS OR SOLO FIT SYSTEM: IF YOUR HELMET IS FITTED
WITH AN MRAS OR SOLO FIT SYSTEM, YOU CAN ADJUST THE
HEIGHT BY CHANGING THE POSITION OF THE CONNECTION
WITH THE HELMET. TO DO THIS, SIMPLY UNCLICK (FIRM
PULLING MOTION) THE ARMS OF THE FIT SYSTEM FROM
THE SIDES OF THE HELMET AND REINSERT THEM INTO THE
UPPER OR LOWER HOLE.
O
R
P
S
1
2
3
Q
7 - ENGLISH