Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Take temperature
4
Press the temperature button (you can press and hold the button or press and
release it). When the thermometer is placed correctly, the screen displays a dashed
line animation while it takes a reading. After the animation sequence (under 2
seconds), the display shows the temperature reading. The appropriate fever light
color is displayed on screen and the confirmation beep is heard.
If the thermometer is positioned too far away from the forehead, it will prompt you
to move the thermometer closer by displaying diagram and "0-5 cm". Slowly move
the thermometer toward
the forehead until the horizontal line
animation starts and the temperature
reading is displayed.
5
Read temperature
Remove the thermometer and read the temperature.
For low (no backlight) and acceptable (green backlight)
temperature range, you will hear a single long beep for 2 seconds.
For elevated (yellow backlight) and possible high fever (red
backlight) temperature range, you will hear 10 short beeps.
To repeat
Go to step 3.
To turn off
6
Press the power button to turn off. Device will also shut off automatically after 60 seconds of no use.
6
0-5 cm
(
)
0 - 3"
0-5 cm
Red
(
)
0 - 3"
High
Yellow
Elevated
Green
Normal
Elev
Re
Hig
Yell
Gre
Nor
Publicidad
Tabla de contenido
