Making Connections - Samson AURO X12D Manual Del Proprietário

Making Connections

Using a Microphone
• Be sure that the Auro X12D/X15D Power switch
is set to the off position.
• Turn the LEVEL control fully counterclockwise to
the off position.
• Connect the power cable to an AC socket.
• Using a standard XLR cable, plug a microphone
into the Auro's XLR INPUT 1.
• Set the MIC/LINE switch to the MIC (down)
position.
• Set the MIX 1/2 & THRU switch to the MIX 1/2
position.
• Switch the Power switch to the ON position.
• While speaking or singing into the microphone,
slowly raise the LEVEL control until you have
reached the desired level.
• For larger sound reinforcement you can run
several monitors using the Line Output to daisy-
chain one Auro to another.
Using a Stereo Line Level Signal
• Be sure that the Auro X12D/X15D Power
switch is set to the off position.
• Turn the LEVEL control fully counterclockwise
to the off position.
• Connect the power cable to an AC socket.
• Using standard XLR or ¼" cables, connect the
line level signals from a mixer or keyboard into
the Auro Inputs.
• Switch the Power switch to the ON position.
• Now, run an audio signal from your mixer (like
music from an MP3 player) while slowly raising
the Auro's Level control until you have reached
the desired level.
Auro X12D/X15D 11