Angelcare AC320 Manual Del Propietário página 5

1- SETTING UP THE PARENT UNIT
1
3
2- SETTING UP THE SENSOR PAD (ON MODEL AC327 AND AC337)
The Sensor Pad is designed to detect subtle baby movements on the surface of the
mattress.The alarm will only sound if NO movement is detected for 20 seconds.
3
1
2
Correct positioning
for slatted base
2
Charge the Parent
Unit 8 hours
prior to first use
8H
Regular charging time
is 4 hours
1. Remove the battery cover
and insert the battery face
with + face up
2. Replace the battery cover,
align 2 dots and click to secure
3. Remove the mattress from
the crib, place Sensor Pad
- Angelcare® logo side
up - on base in approximate
centre of mattress. It should
be centred on the hardboard if
your crib requires a hardboard
support (see 'IMPORTANT' note
below)
4. Replace the mattress
E
N
5