Bosch FPE-7039 Manual Del Usuario página 11

MUX expansion module
2 Description
The FPE‑7039 MUX expansion module is designed to enhance
the conventional features of the D7024 or FPD-7024/DS9400
Fire alarm control panels (FACPs). The module connects directly
to the FACP for either two Class B multiplex buses or one
Class A multiplex bus. When installed as two Class B multiplex
buses, you can program addresses 9 through 255. When
installed as one Class A multiplex bus, you can program
addresses 9 through 128.
The module also increases the number of relay outputs (to 58
on the D7024/DS9400 control panels and 59 on FPD‑7024
control panels). It adds an additional 400 events to the history
buffer for a total of 499 non‑volatile events. It also allows for up
to 100 system users (an addition of 84 PINs from the base
system).
The module can be programmed remotely from a PC using RPS
Remote programming software.
The module can be used with the Bosch Security Systems, Inc.
control panels and modules indicated in the following table.
Control panels
Active:
Legacy:*
Modules
Active:
Bosch Security Systems. Inc.
FPD-7024 Fire alarm control panels
D7024 Fire alarm control panels
DS9400 Control panels
D7042 Multiplex eight-input remote module
D7042B Multiplex eight-input remote module
with enclosure
D7044 Multiplex single-input module
D7044M Multiplex mini single-input module
Description | en
2016.10 | 1.0 | F.01U.330.684
11