Technical Data; Fuel Requirements - Truper PRETUL RECE-160P Instructivo

Technical data

Description
Drum capacity
Mix capacity
Capacity per bag
Production per hour
Drum speed
Drum's opening diameter
Motor cylinders capacity
Potency
Maximum speed
Production cycle
Operating time
Fuel tank
Work cycle

Fuel requirements

• The concrete mixer has an air-cooled 4-stroke motor using pure unleaded gasoline.
• Leaded or dirty gasoline increase deposits in the motor and makes its life span shorter.
• Under no circumstance ever mix oil with the fuel.
• Do not smoke near fuel or the gasoline filling up area or when operating the concrete mixer.
WARNING
• Under no circumstance ever use fuel mixed with ethylic alcohol (gasohol), ethanol or methane. These
WARNING
substances attract humidity causing separation and acid formation while stored. Acidity can damage the motor fuel system
when it is stored.
• Avoid having problems with the motor. Drain the fuel system before storing the mixer for periods of 30 days or longer. Drain
the gasoline tank, start the motor and let it run until the fuel and carburetor lines are empty. Use fresh gasoline after long
periods in storage.
• Do not use motor or carburetor cleaning products inside the gasoline tank. These products cause permanent damage.
CAUTION • The mixer motor is built with an oil deposit. It is fundamental for its performance prevents damaging the motor.
• Check oil level before using the Concrete Mixer. Fill up wit 4-cycle motor automotive oil SAE 10W-30.
WARNING
Code
Motor
Fuel
RECE-160P
28147
Gasoline motor cement mixer
42.2 Gallons
31.7 Gallons
0.5
634 Gal/h
33 RPM
15.75"
4-cycle OHV
99 cc
2.5 Hp
3600 RPM
3 minutes
2.0 h
Gasoline
0.34 Gallons
60 minutes idle per tank consumed
3
ENGLISH