First Use; Checking The Laminator And Product Contents; Setting Up The Laminator; Activating / Deactivating The Laminator - Easy Home OL 350-S Manual Del Usuario

13" Laminator

First use

Checking the laminator and product contents

NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointed objects, you may easily damage the
laminator.
− For this reason, be very careful when opening the
packaging.
1. Take the laminator out of the packaging.
2. Check whether the laminator or the individual parts exhibit damage. If
this is the case, do not use the laminator. Contact the manufacturer at the
service address specified on the warranty card.
3. Check to make sure that the delivery is complete (see Fig. A).

Setting up the laminator

1. Position the laminator so that there is enough space to insert a laminating
5
pouch . Do not position the laminator directly in front of a wall or other
objects.
2. Connect the power plug to a properly installed socket with a protective
conductor (120 V = house connection).

Activating / deactivating the laminator

1. Switch the multi-function switch
for cold lamination (see Fig. C).
2. Move the multi-function switch to "II" (HOT) to switch the laminator to hot
lamination.
The READY indicator with thermo-transfer-technology
turn from blue to red once the laminator has reached the correct
temperature for hot lamination. The preheating time may vary
depending on the ambient temperature and air humidity.
3. Move the multi-function switch to "O" (OFF) to switch the laminator off.
AFTER SALES SUPPORT
1 877-386-8264
USA
7
to "I" (COLD) to switch the laminator on
www.monolith-support.com
USA
First use
1
will
13