Operation; Risk Of Injury; Hot Lamination - Easy Home OL 350-S Manual Del Usuario

USA

Operation

Operation
WARNING!

Risk of injury!

Improper handling of the laminator may result in injury.
− If an object (sleeves, tie etc.) is unintentionally taken into
the pouch infeed slot, immediately disconnect the power
plug.
NOTICE!
Risk of damage!
Improper handling of the laminator may result in damage.
− Do not in any case laminate documents with a treated
surface, such as fax thermopaper or Polaroid pictures, and
papers with surfaces that may be altered through heat
should only be laminated using cold lamination.
− Only use one pouch per lamination, as pouches may stick
tightly together.
− Do not leave any laminating pouches in or next to the
laminator after lamination.
When using the laminator, a slight odour may be produced. Ensure
there is sufficient ventilation in the room, e.g. by opening windows.

Hot lamination

1. Move the multi-function switch
and operate it in hot mode.
The READY indicator with thermo-transfer-technology
2. Place the document that you wish to laminate between the two sides of the
laminating pouch
3. Insert the laminating pouch closed-edge first into the pouch infeed slot
on the back of the laminator. The heating rollers will automatically pull the
laminating pouch in and move it to the pouch output slot
the laminator. Do not use force to pull out the laminating pouch.
14
www.monolith-support.com
7
to "II" (HOT) to switch the laminator on
5
. Ensure that it lies flush with the closed edge.
13" Laminator
1
must be red.
4
on the front of
AFTER SALES SUPPORT
1 877-386-8264
USA
3