Easy Home OL 350-S Manual Del Usuario página 9

13" Laminator
− If the power cable of the laminator is damaged, the
manufacturer, its customer service team or a person with
similar qualifications must replace it.
− Do not open the housing; instead, have a qualified
professional perform the repairs. Contact the service
address provided on the warranty card. Liability and
warranty claims are waived in the event of repairs or
conversions performed by the user, improper connection
of the device or incorrect operation.
− Only parts that comply with the original device data may
be used for repairs. Electrical and mechanical parts, which
are essential for providing protection against sources of
danger, are located in this laminator.
− Do not operate the laminator with an external timer or
separate telecontrol system.
− To protect against the risk of electrical shock, do not
immerse the laminator, the power cable or power plug in
water or other liquids.
− Never touch the power plug with damp hands.
− Do not perform any other work (such as cleaning) on the
laminator while it is operating.
− Never pull the power plug out of the socket by the power
cable; instead, always do so by taking hold of the power
plug.
− Never use the power cable as a carrying handle.
− Keep the laminator, power plug and power cable away
from open flames and hot surfaces.
− Lay the power cable so that it does not pose a tripping
hazard.
− Do not kink the power cable and do not lay it over sharp
edges. Do not let power cable hang over edge of table or
counter.
− Only use the laminator in indoor areas. Do not use it in wet
rooms or in the rain.
− Never store the laminator so that it is at risk of falling into a
bath tub or washbasin.
AFTER SALES SUPPORT
1 877-386-8264
USA
www.monolith-support.com
USA
Safety
9