Use; Starting Cooking - Blaupunkt 5RZ34410 Manual De Instalación

3.3 Use

3.3.1 Starting cooking

After switching on the appliance, you will hear one beep, and all displays will be illuminated for 1 second
and then go out, indicating that the ceramic hob has switched to Standby mode.
Touch the ON/OFF controller.
All displays will show "-".
Place a suitable pot or pan on the cooking zone you would
like to use.
• Ensure the base of the cookware and surface of the
cooking zone are clean and dry.
Touch the cooking zone controller.
Select a temperature setting by touching the "-" or "+"
controls.
• If you do not select a temperature setting within 1
minute, the ceramic hob will switch off automatically. In
this case, you will have to start over with step 1.
• You can change the temperature setting at any time
during the cooking process.
• If you have pressed one of these buttons, the value will
be adjusted up or down.
32