Installation Configurations - Hitecsa RCAH RCF Serie Manual De Instalación, Operación Y Mantenimiento

3 – I
C
NSTALLATION ONFIGURATIONS
Possible air duct layout
According to duct system, it is possible to adjust air intakes and outlets to meet the configurations shown on fig. 3-1.
3 4
1 2
(1 = fresh air, 2 = return air, 3 = supply air, 4 = exhaust air)
To modify the position of the suction inlets it is sufficient to exchange two panels each other, as shown on fig. 3-2. For
this operation provides you with a AW20 head tool.
4 – T
RANSPORT
Packaging
Each unit is loaded on a wood pallet and wrapped with protective cellophane; this packaging shall be kept intact before
installing.
Components or options not mounted in the basic unit for technical reasons are supplied packaged apart or together with
the main packaging.
Moving & transportation
Depending on weight and dimensions, in order to move the unit make use of appropriate means while ensuring safety in
operating.
Weight and dimensions are well indicated in this manual.
While moving, keep the unit as it has been loaded on the truck, avoiding any uncontrolled rotation and overturning, first.
Check on receipt
Upon receipt of the unit please check all parts, they must be intact and free from possible damage during transportation;
in the event of damage, it has to be reported to the carrier, as a reserve clause in the transport document.
Storing
In the event of a long storage keep the unit in its packaging, preserved from dust, heat and vibration.
The Supplier is not responsible of any damage due to improper unload or improper storage.
4
IOM_RCAH RCFi_5a36_207998_191101_ES-EN-IT