Software Configuration - AGB OPERA BIT Guía De Usuario

2. Software configuration

EN
2.1 First access to the software
(fig.1)
With the administrator login details you can create other users (paragraph 2.3).
2.2 System setup changes
To configure settings of the Opera Bit Check-In
Options (fig.2)
Filters (fig.2)
ATTENTION: it is possible to see the complete list of rooms during the check-in.
To configure settings of the Opera Bit Manager
Options (fig.2)
2.3 Creation of new software user
Software Users (fig. 12)
2.4 New Cards initialization
To initialize a Neutral Card or a Setup Card as:
New Cards (fig. 11)
14
Enter the software Opera Bit Manager
by using the following login details as an administrator.
User:
Password:
:
• • Enter the software Opera Bit Check-In
Click on the settings at the top of the page on the left and then on General to:
• • Choose the default settings. These are default settings for each new
• Time of arrive and departure;
•
• • Number of nights;
• • Profile.
• • Start the support section with TeamViewer;
• Set the language;
• • Set the automatic check-out (paragraph 3.5);
• • Change the dimension of icons (clicking on the cell, the dimension of rooms icon
will be reduced).
Click on the settings on the left top of the page and then on "filters" to activate or
deactivate the possibility to filter the rooms of the hotel inserted in a defined area.
To activate/deactivate a filter, click on the
• • Enter the software Opera Bit Manager
Click on the settings on the left top of the page and then on "General" for:
• Start the support section with TeamViewer;
• Set the language;
• Do the manual backup of the database;
• Reset the database from the previous backup.
• Enter the software Opera Bit Manager
• Menu: Software Users.
• • New .
• • Add the username.
• • Select the user level:
Administrator (access to all the functions);
Director (as the administrator, he can't create Supervisor Cards);
Reception (the staff can create new Guest Cards, use the BlackList, check the
status of alarms);
Maintenance (it can change the installation but it can't create any cards).
• • Save .
• • The default password is "password". It has to be replaced on the first access of the
User.
GUEST CARD
• • Menu: New Cards.
• • Approach a Neutral Card to the reader.
• • Select Guest.
OPERATOR CARD
or Opera Bit Check-In
admin
admin
.
near the name of the area.
:
.
.
,
check-in.
Opera Bit Manager
Opera Bit Manager