Troubleshooting; Authorized Representative - Cuda Fiberoptics XLS-180 Manual De Uso

11. TROUBLESHOOTING

Problem
The power indicator (refer
to 4.1) is not lit.
The power indicator is lit,
but Xenon lamp will not
ignite.

12. AUTHORIZED REPRESENTATIVE

Metron Instruments
Darby House
Bletchingly Rd.
Merstham, Surrey RH1 3DN
UK
Phone 441737645221
LIT034CUDA
(English)
Solution
A. Check that the AC power cord is properly
connected.
B. Check the fuses. If necessary, replace.
A. Check lamp connection.
B. Check that the lamp door cover is secured.
C. Check hourmeter if lamp hours exceeds the rated lamp
life.
D. Replace the lamp (refer to 9.1).
Rev. K
Page 12 of 60