Troubleshooting; Authorized Representative - Cuda Fiberoptics MD-150T Manual De Uso

11. TROUBLESHOOTING

Problem
The power is on, but
lamp will not ignite.

12. AUTHORIZED REPRESENTATIVE

Metron Instruments
Darby House
Bletchingly Rd.
Merstham, Surrey RH1 3DN
UK
Phone 441737645221
LIT046 CUDA
(English)
Solution
A. Check that the AC power cord is properly
connected.
B. Check the unit circuit breaker. If necessary, reset.
C. Check the lamp connection.
D. Replace the lamp (refer to 9.1)
Rev. D
Page 12 of 60