Technical Data; Preparations At The Workplace; Inserting The Battery; Removing The Battery - Hilti TE 500-A36 Manual De Instrucciones

4

Technical data

Rated voltage
Weight
Chuck
Storage temperature
Ambient temperature for operation
5 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
6 Operation

6.1 Preparations at the workplace

Switch the product off or remove the battery before making adjustments
or changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.

6.1.1 Inserting the battery

WARNING
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery
and the contacts on the product are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the product until it engages with an audible click.
3. Check that the battery is seated securely.

6.1.2 Removing the battery

1. Press the battery release buttons.
10 English
TE 500-A36
36 V
7.9 kg
(17.4 lb)
TE­Y
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
36 V
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
−10 ℃ ... 45 ℃
(14 ℉ ... 113 ℉)
2240496
*2240496*