On/Off; Drain; Operating Mode: Circulate; Operating Mode: Closed - Speck BADU OmniTronic Traducción De Las Instrucciones Para El Manejo Originales

also possible outside the filter times. During this process, the
BADU OmniTronic takes over the monitoring and control of the
filter pump. This ensures that the pump is turned off during the
switching process and that only the positions "Backwash" and
"Rinse" are turned on. The output to the pump with the
asynchronous motor (Lp, Np) always switches in parallel to the
eco green line pump's speed levels. The eco pump's
backwash/rinse speed is n2.
3.3.1

On/off

The BADU OmniTronic has an illuminated on/off switch with which
the power supply can be turned on or off.
3.3.2

Drain

The valve can be moved from "Filter" to "Drain". When the valve
reaches this position, the filter pump turns on. The "Drain" function
has no time limitation. In this operating mode the pool is drained.
During the draining process, the filter pump is supplied with power
internally.
NOTICE
 Avoid running the pump dry.
3.3.3

Operating mode: circulate

The valve turns to "Circulate" and the pump turns on. The eco
pump switches at n1. In this valve position, the water is circulated.
3.3.4

Operating mode: closed

The valve turns to "Closed" and the pump does not turn on.
3.3.5

Keys

Arrow keys: navigate in the menu; OK key: accept/save
parameter; Esc key: back to menu
Blank key: no function
05|2018
Description
EN 19