Brother NC-7100w Guía De Configuración Rápida página 7

5
Check the wireless network connection
status. It may take a few minutes to
change from 0.0.0.0 to 169.254.x.x IP
address to be shown on screen (where
x.x are numbers between 1 and 254).
If the Brother wireless print server
you want to choose is not listed,
follow these steps:
1 Move your printer with the wireless
print server installed closer to your
PC, or reorient the print server and try
again.
2 Reset the print server back to its
default factory setting and try again.
See Other Information in this Quick
Setup Guide for information how to
reset to factory default setting.
3 Refer to Chapter 10 of the NC-7100w
Network User's Guide on the
CD-ROM we have supplied with
NC-7100w.
Continue to Step 3
®
For Mac OS X 10.1 to 10.3 Users
1
Click the AirPort status icon and select
Open Internet Connect....
2
Click the Network tab to see the
available wireless devices.
You can see the Brother wireless print
server in the Network option.
Select SETUP.
3
Your wireless network is connected
successfully.
6