English
F ault
Cutting head does release line.
If you have any further questions,
contact your authorised dealer on
site.
17
C aus e
Cutting head entangled with
grass.
No line in the cutting head.
Coil jammed.
Cutting head dirty.
Line fused together.
Line twisted when wound up.
Not enough line released.
Meas ure
Stop the engine and clean the cutting
attachment.
Wind up new line.
Replace coil.
Clean coil and coil housing.
Pull apart, take out the fused part and win d
up the line again.
Pull apart and wind up the line agai n.
Tap t he bump head and pull out the line
until 10 cm of line is outside the cutting
attachment.
Operating manual