Skil 3610 Instrucciones De Operación Y Seguridad página 39

0
WARNING
WARNING
WARNING
The legs that accompanying tablesaw must be
WARNING
bolted to the floor.
21
Security Cover
(see figure 23)
Moving up the red botton of EMERGENCY STOP 1 and open the
yellow security cover 2
.If you want to frequently connect and disconnect the power tool
for the job, you should lock the security cover in the upperTo
this should fully open the security cover.If you want to leave the
power tool on for a long time, should not, for security reasons,
lock the security cover.
The red button on security cover then serves as EMERGENCY
STOP switchTurn on
To turn
on, press the green switch.
Turn off
With locked security cover:
Press the red switch
With safety cover unlocked (EMERGENCY STOP function):
Press the red emergency stop button.
Outage
The turn on-off switch is a zero voltage switch, which prevents
an unintended restart of the power tool after any outage. To
reconnect the power tool, you must press the green switch again.
22
2
WARNING
32-35.
39.
2
2