Peavey PC 1600x Cover Manual De Instrucciones página 3

Congratulation on your purchase of the PC 1600x
digital workstations, sequencer control or remote MIDI editing. As a matter of fact, the PC 1600x will edit and
control just about ANY MIDI device. Fifty factory presets give a good representation of its power, and all fifty are
completely user-programmable! MIDI data is transmitted using the following controllers:
1. Sixteen programmable 60 mm faders, which can be assigned to transmit continuous controller
data (like Volume, Pan, etc.) or any MIDI String (i.e. Channel, System messages). Also, any fader
can be the master over any of the other faders. To simplify operation, each fader can be individually
named.
2. Sixteen programmable buttons, which can be assigned as: fader mute, fader solo, program
change, note on/off, MIDI string, MIDI string with button press & release (2 messages), MIDI string
toggle (2 messages), fader send, scene send and fader identity. Like the faders, each button can
be named. Also, buttons can be accessed remotely via Note or Program Change messages.
3. Data wheel - the data wheel can be linked to a fader or Control Voltage input and duplicate its pro-
gramming. It can also transmit the value of the last fader moved.
4. Two Control Voltage Pedal Inputs - the 1600x allows you to plug in and assign CV pedals. These
are assigned like the faders. The CV 2 jack can also sub as a dual footswitch input.
The PC 1600x has even more "under the hood!"
100 scenes: Just in case there comes a time when you would like to save your fader's physical position, (like
when mixing), the PC 1600x offers 100 scenes that can be saved and recalled as needed. This feature is ex-
tremely useful for MIDI light controllers, MIDI mixing, MIDI controllers, etc.
Three Merge Modes: When MIDI connections place the PC 1600x between the source of data (sequencer, etc.)
and the destination (tone modules, etc.), it can merge with controller data coming into it in a variety of ways.
Three modes are available:
1. Merge - Fader movements are merged with incoming data.
2. Replace - Same as above, except that when the fader is moved, incoming data is filtered and re-
placed by data generated by the fader. Fader position determines the value transmitted.
3. Update - When the fader is moved, its data matches the last value of the incoming data regardless
of fader position. This allows seamless modification of the incoming data.
MIDI Filtering: The PC 1600x contains an extensive MIDI filtering section.
Programmable Set-Up string: Along with all of the fader, button, etc. settings, a MIDI Set-up string can be
transmitted when a preset is selected. This string can send Bank select, Program change and Volume settings for
ALL 16 channels. In addition, a scene and a MIDI string of up to 80 bytes can be sent.
Easy Synth Programming: The PC 1600x will accept presets pre-programmed for editing. We've made this as
"painless" as possible, by designing specific presets for the PC 1600x that are stored in the Spectrum Synth,
Spectrum Organ and Spectrum Bass II. You simply transfer them to the PC 1600x, and you instantly have fader
and button control over all the parameters. Now, without ever having to deal with hexadecimal SysEx messages,
you can edit presets quickly and spend more time getting work done.
The PC 1600x will revolutionize your MIDI set-up! Hook it up to your computer, keyboard, or other MIDI device
and take your music to another level.
Introduction
™ MIDI Control Station! This is THE MIDI command station for
3