Installation On The Machine Table; Installation On Conventional Machine Tables - Allmatic NC8 Serie Manual De Instrucciones

ALLMATIC
7

Installation on the Machine Table

WARNING
Falling of the NC8.
Crushing of hands and feet.
Ø Use suitable lifting gear only.
Ø Wear personal protective equipment.
Wear safety gloves!
Wear safety shoes!
Ø Check clamping surfaces for cleanliness and unevenness before installation.
7.1

Installation on Conventional Machine Tables

Fig. 15: Installation on a machine table
1 Clamping claw
2 Fitting slot nut
NC8 Series
Installation on the Machine Table | 7
1 2
3 T-groove machine table
EN
3
57 / 410