General Instructions - THERMOBILE IMA Serie Manual Del Usuario

1.6 Use this product for the purpose it
was intended for
The convector heater was designed for use
indoors and outdoors. The heater can be used for
the heating of tents, building sites, showrooms,
sports halls, storage sheds, workshops, round-
the-clock projects, warehouses, greenhouses,
polytunnels, spray arrangements, and for the
drying of agricultural produce and bulbs.
Caution
If the heater will be installed indoors,
make sure that there is proper
ventilation in the room.
Make sure the flue gas can only flow to
an outside source separate from the
room.
1.7

General instructions

Warning
General hazard warning
• Failure to comply with the
precautions and instructions
provided with this heater, can result
in death, serious bodily injury and
property loss or damage from
hazards of fire, explosion, burn,
asphyxiation, carbon monoxide
poisoning and/or electrical shock.
• Only persons who can understand
and follow the instructions should
use or service this heater.
• If you need assistance or heater
information such as an instruction
manual, label, etcetera contact the
manufacturer.
Warning
Fire, burn, inhalation and explosion
hazard. Keep solid combustibles, such
as building materials, paper, or
cardboard, a safe distance away from
the heater as recommended by the
instructions. Never use the heater in
spaces which do or may contain volatile
or airborne combustibles such as
gasoline, solvents, paint thinner, dust
particles or unknown chemicals.
Warning
Not for home or recreational vehicle use.
IMAC - IMA - G US
The heater is designed and approved for use as a
construction heater in accordance with Standard
ANSI Z83.7 - 2000, CGA 2.14 - 2000.
40.020.956 - rev. 03 - 2010
Check with your local fire safety
authoroty if you have questions about
applications.
Warning
• Make sure to always follow the local
standards and guidelines as well as
the local requirements.
• Make sure to read this manual
carefully before using the convector
heater.
• Keep this document near the
convector heater.
• Do not lean on the convector
heater.
• Do not tamper with the heater.
Adjustments may only be made by
specially trained personnel.
Warning
• Keep at least 7 ft away from the
exhaust opening of the convector
heater.
• Make sure there is sufficient air for
proper combustion.
• Make sure there is no highly
flammable material near the
convector heater.
• Make sure that the convector heater
has cooled off sufficiently and that
the plug has been removed from
the socket before carrying out any
repair or maintenance work.
English
7