SAFETY ___________________________________
supervision.
▪
Do not dismantle the appliance
under
any
No
warranty
accepted for damage resulting
from improper handling.
▪
The vacuum cleaner is very
powerful; thus before plugging
the cord into the wall socket,
make sure the switch is in the
'off' position. Hold the vacuum
cleaner firmly when starting and
while using it.
▪
If the inlet, hose or telescopic
tube is blocked, switch off the
vacuum cleaner and remove the
blockages before re-starting the
vacuum cleaner.
▪
Washing filters improves vacuum
performance. Make sure all the
filters are completely dry before
inserting back into the vacuum
cleaner.
16 ENGLISH
circumstances.
claims
are
Caution
The motor is equipped with a
thermal cut-out. If for any reason, the
vacuum cleaner should over-heat,
the thermostat will automatically
turn the unit off. Should this
occur,
unplug
cleaner from the wall socket.
Remove the dirt container and
empty. Clean the filters. Allow the
cleaner to cool for approximately
1
hour.
Continue
the appliance by inserting the
power plug into the wall socket
and switching it back on. If the
appliance does not start, wait
another 30 minutes and repeat
the above-mentioned steps.
the
vacuum
operating