Cord Storage; Accessory Storage - Kenmore Premalite 721.31160 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

78017_Kenmore vac_EN_final
WARNING
Personal Injury and Product Damage Hazard!
DO NOT use outlets above counters. Damage to items in the surrounding area
could occur.

Cord Storage

For ease of use,
extend the cord
from the base of
the vacuum cleaner
and press into the
retainer clip.
To store the cord:
1. Make sure the cord hanger is in the
UP position.
2. Wrap the cord around the cord
hanger and hook, then clip the plug
onto the cord.
NOTE: To reduce the risk of electric
shock, this vacuum cleaner has a
polarized plug; one blade is wider than
the other. This plug will fit in a polarized
outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified
electrician to install the proper outlet.
Do not change the plug in any way.

Accessory Storage

Your vacuum cleaner features
convenient on-board storage for the
crevice tool and dusting/upholstery tool.
1. Slide the crevice tool onto the upper
holder on the back of the vacuum
cleaner.
NOTE: It will only fit one way.
2. Press the dusting/upholstery tool onto
the bottom holder.
10/17/07
9:00 AM
ASSEMBLY
To unwind the cord:
Clip
1. Rotate the upper
2. Unclip the plug and
8
Page 8
cord holder to the
DOWN position.
extend the cord.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido