Samsung SCC-3100A Manual Del Usuario página 7

Names and Functions of Each Part
2. Number Pad
0 ~ 9 : Used for entering camera ID, channel number,
monitor number, DVR ID, etc. (see p.26).
MONITOR : Select a monitor for matrix output
CAMERA : Enter camera number and press the CAMERA
button to set the camera ID (PTZ mode) or set the
channel (DVR mode).
SPD PELCO-D PELCO-P
TRACE RUN TRACE RUN
TRACE RUN
F+1
(PATTERN) (PATTERN)
TRACE MEMORY
F+2
TRACE MEMORY
F+3
STOP
AUTO POWER
F+4
ON
AUTO POWER
F+5
OFF
SRX-100B
F+6
POWER ON
SRX-100B
F+7
POWER OFF
Caution
• When using functions that are performed by a combination of the function
button and numeric keys, the setup may be different depending on the camera
manufacturer.
• Use the AUTO POWER ON setting to allow the camera to resume the tasks in its
memory upon power supply, even if they were previously aborted as a result of
power failure, etc.
12
SYSTEM CONTROLLER
SAMSUNG
PANASONIC ELMO BOSCH
ELECTRONICS
TRACE RUN TRACE RUN
(PATTERN)
(PATTERN 1)
F2
TRACE RUN
(SPECIAL 2) (PATTERN 2)
TRACE RUN
F3
(PATTERN 3)
AUTO-SORT
User's Manual
Names and Functions of Each Part
3.External Device Selectors
PTZ : Selects the PTZ mode (see p.20~29).
MATRIX : Selects the MATRIX mode(see p. 40~44)
DVR : Selects the DVR mode(see p. 30)
SETUP : Activates the system setup menu(see p. 27)
4. Universal Controller
ZOOM W/T : Performs camera zoom action (wide and
telephoto).
FOCUS -/+ : Used for manual focus adjustment.
: Used for moving the menu cursor up (when menu
is active), pausing DVR playback, or playing stills.
: Used for moving the menu cursor down (when
menu is active) or stopping DVR playback.
: Used for moving the menu cursor left (when
menu is active) or playing recorded video in the reverse direction.
: Used for moving the menu cursor right (when menu is active) or Fast Playback.
: Used for playing recorded video.
ESC : canceling entered values, or moving to the previous stage.
ENTER : Used for executing the entered values and performing setups (PTZ mode and DVR mode)
Note
• The ESC/ENTER button is used for IRIS control of types of ELMO and BOSCH.
SYSTEM CONTROLLER
13
User's Manual