Setting The Time And Date - resideo Honeywell T6 Pro Smart Guia Del Usuario

Setting the time and date

When the thermostat is connected to Wi-Fi and registered to your Honeywell
Home app account, it will set the time and date and adjust for daylight saving time
automatically. (The CLOCK and DATE sub-menus won't be available.)
If your thermostat is not connected, you'll need to set the time and date manually
using the steps below.
Setting the time
1 Touch Menu on the thermostat home screen.
2 Touch the
CLOCK, then touch Select.
3 Touch the
TIME, then touch Select.
4 Press or
hold the buttons to move more quickly).
Touch Done when finished.
5 Set clock format (12 hours or 24 hours) and
daylight saving time in the same CLOCK
sub-menu.
Setting the date
Touch Menu on the thermostat home screen.
1
2 Touch the
then touch Select.
3 Touch or
Select to confirm.
4 Continue to set day and year in the same
way. Touch Select to save your changes.
or arrows until you see
or arrows until you see SET
to set the time (or press and
or arrows until you see DATE,
to set the month, then touch
Back
23
Back Select
PM
Done Cancel
Select Back Select