Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PAGE 2
SB-6-377
This manual contains information that is important for you to know and understand. This information relates to USER SAFETY
and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the following symbols. Please pay
particular attention to these sections.
Important safety information – A hazard
that may cause serious injury or loss
of life.
READ tHE MANUAL
Before operating finishing equipment, read and
understand all safety, operation and maintenance
information provided in the operation manual.
wEAR SAFEtY GLASSES
Failure to wear safety glasses with side shields
could result in serious eye injury or blindness.
DE-ENERGIZE, DEPRESSURIZE, DISCONNECt
AND LOCK OUt ALL POwER SOURCES DURING
MAINtENANCE
Failure to De-energize, disconnect and lock out
all power supplies before performing equipment
maintenance could cause serious injury or death.
OPERAtOR tRAINING
All personnel must be trained before operating
finishing equipment.
EQUIPMENt MISUSE HAZARD
Equipment misuse can cause the equip ment to
rupture, malfunction, or start unexpectedly and
result in serious injury.
KEEP EQUIPMENt GUARDS IN PLACE
Do not operate the equipment if the safety
devices have been removed.
HIGH PRESSURE CONSIDERAtION
High pressure can cause serious injury. Relieve
all pressure before servicing. Spray from the
spray gun, hose leaks, or ruptured components
can inject fluid into your body and cause
extremely serious injury.
PRESSURE RELIEF PROCEDURE
Always follow the pressure relief procedure in
the equipment instruction manual.
FOR FURtHER SAFEtY INFORMAtION REGARDING BINKS AND DEVILBISS EQUIPMENt,
SAFEtY PRECAUtIONS
Important information that tells how to
prevent damage to equipment, or how
to avoid a situation that may cause mi-
nor inury.
Read the following warnings before using this equipment.
SEE tHE GENERAL EQUIPMENt SAFEtY BOOKLEt (77-5300).
Note
Information that you should pay special
attention to.
ELECtRIC SHOCK/GROUNDING
Improper grounding or sparks can cause a
hazardous condition and result in fire, explosion
or electric shock and other serious injury.
PROJECtILE HAZARD
You may be injured by venting liquids or gases
that are released under pressure, or flying debris.
INSPECt tHE EQUIPMENt DAILY
Inspect the equipment for worn or broken parts
on a daily basis. Do not operate the equipment
if you are uncertain about its condition.
NEVER MODIFY tHE EQUIPMENt
Do not modify the equipment unless the
manufacturer provides written approval.
FIRE AND EXPLOSION HAZARD
Improper equipment grounding, poor ventilation,
open flame or sparks can cause hazardous
conditions and result in fire or explosion and
serious injury.
KNOw wHERE AND HOw tO SHUt OFF tHE
EQUIPMENt IN CASE OF AN EMERGENCY
StAtIC CHARGE
Fluid may develop a static charge that must be
dissipated through proper grounding of the
equipment, objects to be sprayed and all other
electrically conductive objects in the dispensing
area. Improper grounding or sparks can cause a
hazardous condition and result in fire, explosion
or electric shock and other serious injury.
Publicidad
Tabla de contenido
