DeVilbiss FRC-650 Manual Del Usuario página 5

SB-6-377 Page 5
PROCEDURE FOR REPLACING tHE FILtER ELEMENtS OF tHE FRC-650 (continued)
Lubricate and install the
Now install the new pre-filter And turn the filtering element Put the new "L" cross
new o-ring on the external
over the coalescent element nut base to fasten it section seal in the bowl
diameter of the nut base
Screw the 4 screws in the
Insert the bowl over Fit the bowl fitting into
body and tighten them
the pre-filter the proper position
with a 3/16" wrench
Value your job and
Protect your equipment:
USE ORIGINAL
DeVilbiss parts
DeVilbiss reserves the right to modify the characteristics of its products without previous warning.