Honda WX15 Manual De Explicaciones página 19

7.Check that all nuts, bolts, and screws are tightened.
Check for loose bolts, nuts and screws.
Tighten the bolts, nuts and screws properly and securely, if necessary.
8.Check the priming water.
The pump chamber should be primed with full of water before
operating.
CAUTION:
Never attempt to operate the pump without priming water, or the pump
will overheat. Extended dry operation will destroy the pump seal. If the
unit has been operated dry, stop the engine immediately and allow the
pump to cool before adding priming water.
16
PRIMING WATER
FILLER CAP