Technical Data; Electric Heated Bain-Maries; Technical Characteristics; Installation Instructions - Diamond E77/BM4T Instrucciones Para La Instalación, El Uso Y El Mantenimiento

1.
1.1 ELECTRIC HEATED BAIN-MARIES SERIES OPTIMA
MOD.
W xD x H/max. Height
E77/BM4T
E77/BM7T
*Supply voltage: 1N AC 240 V 50/60 Hz.
N.B.: Power absorbed with; 1N AC 220 V 50/60 Hz. is approx. 16% lower.
1.2

TECHNICAL CHARACTERISTICS

STRUCTURE Frame made of stainless steel AISI 304, panels and base of stainless steel, mounted on height-adjustable feet.
TANK made of stainless steel AISI 304.
ELECTRICAL THERMOSTAT to control the heating elements, (30 ÷ 90°C) for optimum temperature adjustment.
ELECTRICAL RESISTORS made of Incoloy.
CONTROL KNOBS made of thermally insulated material.
2.
Installation must be performed by qualified technicians according to the law in force.
WARNINGS:
Should the unit be installed against a wall, the latter must be heat-resistant to temperatures of 100°C and must be fireproof.
Before proceeding with the installation, remove the protective plastic film from the relevant parts, eliminating any adhesive
residues with an appropriate cleaning product suitable for stainless steel.
Install the unit in a horizontal position; its correct levelling will be achieved by rotating the adjustable feet.
If the unit is installed by itself, it is advisable to fasten it to make its stability safer.
2.1 INFORMATION ABOUT ELECTRIC HEATED BAIN-MARIES SERIES OPTIMA
The serial plate is located on the back and inside.
DIMENSIONS in mm.
external
Ltr.
400 x 700 x 290/425 2,3
700 x 700 x 290/426 3,2
V
ABSORBED
tank
POWER*
W x D x H
310 x 510 x 160
630 x 510 x 160

INSTALLATION INSTRUCTIONS

Mod.
Matr. N°
KW
- 11 -

TECHNICAL DATA

TOTAL NET
WEIGHT
kW kg
1,53 22
30
3,06
HZ
GB