Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Preparation for winter
The tank, pipes, pump, etc., should always be drained.
Never add anti-freeze to the tank or other parts of the waste
water system to protect against frost damage. Anti-freeze is
very poisonous!
Clean the tank according to the cleaning procedure.
Maintenance
Regularly check the air-relief nipple and clean its sieve if neces-
sary.
Regularly check the hoses and hose connections for possible
leaks and fit new hoses and/or hose clips when necessary.
Also check the tank for damage caused by abrasion. Replace a
damaged tank immediately.
At the end of the cruising season, carry out the cleaning and
sterilizing procedures as described under 'Use'.
A tank and installation which is seriously polluted with algae can
be cleaned by thoroughly rinsing out the tank, pump and pipes
with chlorine.
Technical Data
Rigid waste water tanks for grey water/black water
Type
Capacity
Weight
Max. Pressure
Material
Hose fittings
For filling hose
For discharge hose
For air relief
Fittings for hose
with suction tube
For pump connection
For Vetus waste water deck cap :
*) Nominal values are given for capacity and weight. Slight deviations are possible.
8
110105.03
: BTANK42
BTANK61
:
42
61
9.2
13.4
11.0
16.1
:
3
4
6.6
8.8
:
:
:
For grey water tanks/black water tanks
:
16 mm, 25 mm, 35 mm and 38 mm dia.
∕
", 1", 1
5
8
:
38 mm (1
:
16 mm, 25 mm and 38 mm dia.
∕
", 1" and 1
5
8
:
For grey water tanks/black water tanks
:
38 mm (1
38 mm (1
www.busse-yachtshop.de | info@busse-yachtshop.de
BTANK88
BTANK110
BTANK137
88
110
19.4
24.2
23.2
29.0
6.7
7.5
14.8
16.6
30 kPa (0.3 bar, 4 psi)
Polyethylene, colour: black
∕
" and 1
∕
" dia.
3
1
8
2
∕
") dia.
3
8
∕
" dia.
1
2
∕
") dia.
3
8
∕
") dia.
3
8
Rigid waste water tanks for grey and for black water
BTANK170
BTANK215
137
170
215
30.1
37.4
47.3 Imp.gal.*)
36.2
44.9
56.8 US gal.*)
9.25
11.4
13.6 kgs *)
20.5
25.2
30.0 lbs *)
litres *)
Publicidad
Tabla de contenido
