Aiwa XR-M1000 Manual De Instrucciones página 21

Load discs.
To Dlav all discs in the disc compartme~, press
-11 PLAY/PAUSE (or 4>PLAY on the remote control).
Play begins with the disc on tray 1.
Playing disc number Elapsed playing time
!
I
1
Number of track being played
To rdav one disc oni~ press DISC DIRECT PLAY 1-3.
The selected disc is played once.
Selected disc number
Elapsed playing time
Number of track being played
When the selected button is pressed once more, all the
discs in the disc compartment are played once
continuously.
TO
begin play with the remote control
Press
DISC DIRECT PLAY,
then press numbered buttons 1-3
within 3 seconds to select a disc.
To stop play, press STOP
(or
CLEAR
on tlhe remote
control).
To pause play,
press 01 I PLAYIPAUSE
(or II
SET
on the
remote control),
To resume play, press again.
To search for a particular point during playback,
keep +
or _ pressed and release it at the desired point.
To skip to the beginning of a track during playback,
press
44 or - repeatedly.
To
remove discs,
press A OPEN/CLOSE.
To
start play when the power is off (Direct Play Function)
Press CD on the stereo receiver. The power is turned on and
play of the loaded disc(s) begins.
When A OPEN/CLOSE or
DISC CHANGE
is pressecl, the power
is also turned on and the disc compartment is opened.
To check the remaining time
During play, press EDIT/CHECK on the remote control. The
amount of time remaining until all tracks of the disc finish playing
is displayed. To restore the playing time display, repeat the above.
Selecting a track with the remote control
1
2
Press DISC DIRECT PLAY, then press numbered buttons
1-3 within 3 seconds to select a disc.
Press numbered buttons O-9 and
+1O
to select a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +1 O and 0.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1
Press DISC CHANGE.
2 Remove the discs and replace with other discs.
3 Press A OPEN/CLOSE to close the disc compartment.
m
When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
,,',
3'--
.,
Do not place more than one compact disc on one disc tray.
j;,- *~
Do not tilt the unit with discs loaded. Doing so may cause # .%8
malfunctions.
$@
Do not use irregular shape CDs (example: heart-shaped, E###k
octagonal ones). It may result in malfunctions.
~B~
'v
Use the remote control
RANDOM play
All the tracks on the selected disc or all the discs can be played
randomly.
REPEAT play
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT on the remote control.
Each time it is pressed, the function can be selected cyclically.
RANDOM play — "RANDOM" is highlighted on the display.
REPEAT
play —
"REPEAT" is highlighted on the display.
RANDOM/REPEAT
play —
"RANDOM" and "REPEAT" are
highlighted on the display.
Cancel —
The highlighted indicators '(RANDOM" and
"REPEAT" disappear from the display.
TQK&av all discs,
press <FPLAY (or Pll PLAY/PAUSE on
the C[) player) to start play.
To Dlav
a sinale disc,
press DISC DIRECT PLAY and press
numbered buttons 1-3 within 3 seconds (or DISC DIRECT PLAY
1-3 on the CD player) to select a disc.
During random play it is not possible to skip to the previously
played track with +.
ENGLISH
21