Setting The Timer - SCHOLTES SOTF1610B Guia Del Usuario

3.6 Setting the power
Once the cooking zone switched on press the "+" or "-" key (e) to adjust power level
from 1 to 15. When switching on, you can go directly to 10 power by pressing the «–»
key for the zone. When pressing the Boost touch you will access to boost power.
Note : while Boost function is activated on a zone the other zone has limited power
(see here under).
3.7 Using the flexible zone
The flexible zone can be used as 2 separate zones or as a unique zone.
You can select the total flexible zone by pressing at the same time upper and lower
keys of left zone selection (c). The lower display will indicate you are using the full flex
zone while you will be able to adjust settings by pressing keys on the upper zone.
The power and the timer are adjusted as for a normal cooking zone. To switch the
zone off, press and hold the left zone key selection (c). A long bip sounds and the
display goes off or the «H» symbol appears.
Note: Pressing the touch key in front of or behind the zone deactivates the function
and transfers the settings to the selected zone.
Important: Make sure to place the cookware centered on the single cooking zone. In
case of big pot, oval, rectangular and elongated pans make sure to place the pans
centered on the cooking zone. Examples of good pot placement and bad pot
placement.
220mm

3.8 Setting the timer

Each cooking zone has a dedicated timer. It can be used as soon as the cooking zone
is turned on. To switch it on or change it, press the timer touch key (f) and then the "+"
or "-" key to adjust time setting from 1 to 99 minutes. At the end of cooking, the display
indicates 0 and a warning beep sounds. To cancel this information, press any key.
9