SCHOLTES SOTF1610B Guia Del Usuario página 35

The glass is being
scratched.
Some pans make
crackling or clicking
noises.
The induction hob
makes a low humming
noise when used on
Fan noise coming
from the induction
hob.
Pans do not become
hot and appears in the
display.
The induction hob or a
cooking zone has turned
itself off unexpectedly,
a tone sounds and an
error code is displayed
(typically alternating
with one or two digits
in the cooking timer
display).
The induction hob or a
cooking zone has turned
itself off unexpectedly,
a tone sounds and an
error code is displayed
(typically alternating with
one or two digits in the
cooking timer display).
Rough-edged
cookware.
Unsuitable, abrasive
scourer or cleaning
products being used.
This may be caused
by the construction of
your cookware (layers
of different metals
vibrating differently).
This is caused by the
technology of induction
cooking.
A cooling fan built into
your induction hob has
come on to prevent the
electronics from
overheating. It may
continue to run even
after you've turned the
induction hob off.
The induction hob
cannot detect the
pan because it is not
suitable for induction
cooking.
The induction hob
cannot detect the pan
because it is too small for
the cooking zone or not
properly centerd on it.
Technical fault.
Technical fault.
13
Use cookware with flat and
smooth bases. See 'Choosing the
right cookware' .
This is normal for cookware and
does not indicate a fault.
This is normal, but the noise
should quieten down or
disappear completely when you
decrease the heat setting.
This is normal and needs no
action. Do not switch the power
to the induction hob off at the
wall while the fan is running.
Use cookware suitable for
induction cooking. See section
'Choosing the right cookware' .
Center the pan and make sure
that its base matches the size of
the cooking zone.
Please note down the error
letters and numbers, switch off
the power to the induction hob
at the wall, and contact a
qualified technician.
Please note down the error
letters and numbers, switch off
the power to the induction hob
at the wall, and contact a
qualified technician.