OBJ_DOKU-28030-004.fm Page 26 Wednesday, August 6, 2014 10:12 AM
26 | English
Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If liq-
uid contacts eyes, additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
Service
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the pow-
er tool is maintained.
Safety Warnings for Screwdrivers
Hold power tool by insulated gripping surfaces, when performing an
operation where the fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
Hold the machine with a firm grip. High reaction torque can briefly
occur while driving in and loosening screws.
Secure the workpiece. A workpiece clamped with clamping devices or in
a vice is held more secure than by hand.
Always wait until the machine has come to a complete stop before
placing it down. The tool insert can jam and lead to loss of control over
the power tool.
Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the centre position. Unintentional actuation of the On/Off
switch can lead to injuries.
Protect the power tool against heat, e. g., against continuous
intense sunlight, fire, water, and moisture. Danger of explo-
sion.
In case of damage and improper use of the battery, vapours may be
emitted. Ventilate the area and seek medical help in case of com-
plaints. The vapours can irritate the respiratory system.
1 609 92A 0P3 | (6.8.14)
Bosch Power Tools