Declaration Of Conformity; Battery Charging (See Figure A) - Bosch IXO Manual Original

OBJ_DOKU-28030-004.fm Page 31 Wednesday, August 6, 2014 10:12 AM

Declaration of Conformity

We declare under our sole responsibility that the product described under
"Technical data" is in conformity with all relevant provisions of the directives
2009/125/EC (Regulation 1194/2012), 2011/65/EU, 2014/35/EU,
2014/30/EU, 2006/42/EC. including their amendments and complies with
the following standards:
EN 60745-1, EN 60745-2-2 (battery powered product),
EN 60335-1, EN 60335-2-29 (battery charger).
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
14
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
15.07.2014
Assembly
 Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the centre position. Unintentional actuation of the On/Off
switch can lead to injuries.

Battery Charging (see figure A)

 Do not use other battery chargers. The supplied battery charger is
designed for the Lithium-Ion battery in your machine.
 Observe the mains voltage! The voltage of the power supply must corre-
spond with the data given on the nameplate of the battery charger.
Battery chargers marked with 230 V can also be operated with 220 V.
Bosch Power Tools
English | 31
1 609 92A 0P3 | (6.8.14)