Technical Specifications; Video Camera - OPTIKA MICROSCOPES DM-5 Manual De Instrucciones

8.0 TECHNICAL SPECIFICATIONS

8.1 Microscope
head:
Eyepieces:
nosepiece:
Objectives:
Working stage:
Focusing system:
Illumination:
Mains power:
Fuse:

8.2 Video camera

rEsOluTIOn:
sensor:
sensor imaging area:
data output:
(uncompressed video)
Pixel size:
resolution & frame rate:
sensitivity:
Electronic shutter:
White balance:
s/n ratio:
dynamic range:
digital port:
Imaging software:
system requirements:
digital, monocular, 60° rotating, 4° inclined
Wf10x/16mm
Triple, reversed
Achromatic 4x, 10x, 40x
rotating round stage, diameter: 90 mm, moving range  mm,
slide clips
Coarse and fine with different axis, with focus tension adjustment
White led, non-rechargeable, with brightness control
0V / 0hz
A
640 x 480 pixels (480.000 pixels)
¼"CMOs
4.1 mm x .07 mm
8 bit
7.9 mm x 7.9 mm
640 x 480
 frames/second
. V/lux-sec
(0 nm)
1/16-1/1600
Auto / Manual
≥52 dB
≥60 dB
usB.0
OPMIAs (OPTIKA Micro Image Analysis software), available in English
and Italian
rAM: 6 MB (1 MB recommended)
Video card: separate card (64 MB or higher)
Operating system: Windows XP (sP1, sP, sP ), Windows Vista and
Windows 7,  and 64bit
Page 9