Elkay DSPOUWCS1 Manual De Instalación, Cuidado Y Uso página 8

Tabla de contenido

Idiomas disponibles

Installation / Care / Use Manual

Description

Recessed wall mount of sleek, modern design. TEC refrigeration. Electric heating: high power stainless steel hot water tank is designed for heating.

Includes Energy Saving Mode. Installs directly to drinking water supply.

Ratings

• Dimensions: 351mm (W) ×203mm (D) ×466mm (H)

• Voltage/Frequency: 115V/60 Hz

• Heating Power: 420 W

• Cooling Power: 75 W

Definitions

DANGER

– Indicates death or serious injury will result if proper precautions are not taken.

WARNING

– Indicates death, serious injury or property damage can result if proper precautions are not taken.

CAUTION

– Indicates some injury or property damage may result if proper precautions are not taken.

Authorized Service Personnel – Factory trained personnel or personnel having working knowledge of electrical, plumbing and machine (appliance)

maintenance procedures.

Safety

DANGER

• Please read these instructions completely before starting the installation or performing any service. Failure to follow the instructions and safety precautions

in this manual can result in serious injury or death.

• After installation, keep these instructions in a safe location for future reference.

• Electric supply must be identical in voltage, cycle, and phase to that specified on nameplate.

• Electrical supply must have Ground Fault Circuit Interrupter (GFCI) protection.

• A means for disconnecting electrical supply to the unit must be incorporated in the fixed wiring in accordance with wiring rules. This is to allow electrical

disconnection of the unit from electrical supply after installation.

WARNING

• Prior to use, this dispenser must be properly assembled and installed in accordance with this manual.

• This water dispenser is meant for water usage only. DO NOT use other liquids. Do not use this dispenser for other purposes. Do not use any other

liquid in this dispenser that is not water.

• Do not use excessive force when pressing the touch control buttons, as this may cause damage or malfunction.

• Do not disconnect the dispenser or move it while it is in operation, as this may lead to water leakage and potential breakdown.

• Ensure all tubing's and fittings are secure and free of water leakage.

• Always ensure there is an incoming water supply before the power supply is switched on to avoid overheating of the appliance.

• To enjoy good water quality, purge the system upon first usage or when necessary.

• It is normal for the appliance to generate a slight noise when in use.

• Be extra careful when draining the hot water tank.