Before First Use; Test Run - cosori CO134-AF Manual De Usuario

BEFORE FIRST USE

1. Remove all packaging from the air fryer,
including any temporary stickers.
2. Place the air fryer on a stable, level, heat-
resistant surface. Keep away from areas
that can be damaged by steam or heat
(such as walls or cupboards).
CAUTION!
Leave 5 in / 13 cm of space behind and
above the air fryer.
enough room in front of the air fryer to
remove the baskets.
5 in /
13 cm
Figure 1.1
3. Pull the handle to remove the baskets.
Remove all plastic from the baskets.
4. Press the basket release button to
separate the inner basket from the outer
basket.
5. Wash both baskets thoroughly, using a
dishwasher or a non-abrasive sponge.
6. Wipe the inside and outside of the air
fryer with a slightly moist cloth. Dry with
a towel.
7. Put the baskets back inside the air fryer.
[Figure 1.1] Leave
5 in /
13 cm

Test Run

A test run will help you become familiar
with your air fryer, make sure it's working
correctly, and clean it of possible residues in
the process.
1. Make sure the air fryer baskets are empty
and plug in the air fryer. The display will
show "350°F".
2. Press
on the air fryer display.
Press to change the temperature to
400°F.
3. Press
. The display will show
"PREHEATING". The time will be
automatically set to 6 minutes. When
preheating is done, the air fryer will beep.
4. Pull out the baskets and let them cool for
5 minutes. Then place the empty baskets
back in the air fryer.
5. Press
to set the time. Press
to change the time to 5 minutes.
6. Press
to start the air fryer. When
finished heating, the air fryer will beep.
7. Pull out the baskets. This time, let the
baskets cool completely for 10–30
minutes.
EN
or
9