Horizontal Discharge Installation - Kenmore PRO 233.56033 Manual De Uso Y Cuidado

All hoods are factory shipped with the blower mounted for a vertical discharge confi guration. For a horizontal
discharge confi guration, disassemble the blower from the inner top of the hood and mount it to the inner back panel
of the hood.
1. Using a 5/16" socket, remove all blower
mounting screws from the inner top of
the hood. Keep the screws for further use.
2. Slide the blower to disengage its fl ange from the
retaining bracket.
3. Rotate the blower and engage its fl ange in
the back wall retaining bracket.
4. Using a 5/16" socket and the screws
previously removed, secure the blower to the
hood.

HORIZONTAL DISCHARGE INSTALLATION

HD0269
HD0288
L
EFT SIDE MOUNTING
SCREWS LOCATION
HD0270
R
IGHT SIDE
MOUNTING SCREWS
LOCATION
10
R
IGHT SIDE
MOUNTING SCREWS
LOCATION
HD0282
L
EFT SIDE MOUNTING
SCREWS LOCATION
HD0289