Kenmore PRO 233.56033 Manual De Uso Y Cuidado página 9

2. Punch out the appropriate electrical knockout hole on top (A) or back (B) of the hood. Install the wire clamp
(included in parts bag).
HD0250
3. Remove the fi lters and the grease drip rail.
A. Remove tape on fi lters. Remove fi lters from
hood and set aside.
NOTE: It is recommended to start with the
center one.
B. Remove tape on grease drip rail (1).
Lift out grease drip rail and set aside.
4. Remove the adapter/damper (1), taped inside the hood.
PREPARE THE HOOD (CONT'D)
A
B
HD0172
HD0244
HD0593
9
A
B
1
1