Parts Included With Hood; Parts Not Included With Hood; Tools Needed For Hood Installation; Non-Ducted Installation - Kenmore PRO 233.56033 Manual De Uso Y Cuidado

PARTS INCLUDED WITH HOOD

NOTE
Before proceeding to the installation, check the contents
of the box. If items are missing or damaged, contact the
manufacturer.
HR0042
HR0013
HR0011
Parts Bag
4 Flat Head Screws No. 10-2"
8 Screws No. 8 x 3/4"
1 Wire Clamp
2 Wire Connectors
HR0041
3 Wall Anchors
3 Washers 13/64" ID x 3/4" OD
8 Mechanical Screws No. 8-32 x 1/4"
4 No. 8 x 3/8" Screws
HR0043
Screwdriver
(Robertson or
Phillips)
HR0047
Drill
WARNING: When performing installation, servicing or cleaning the unit, it is recommended to wear safety
!
glasses and gloves.
Wood strip (screwed on
back of hood)
Baffl e Filter
(3 per hood)
(Handles are taped
inside the hood)
Adapter/Damper
3¼" x 10"
Including:

TOOLS NEEDED FOR HOOD INSTALLATION

HR0044
Pencil
HR0051
Wire
Stripper

PARTS NOT INCLUDED WITH HOOD

- 2 shielded GU10, 50 W max. halogen bulbs.
- 55633 or 55643 Decorative flue, to be installed
over the hood (optional)
- 57130 or 57136 Backsplash (optional)
- 55673 or 55683 Recirculation kit, mandatory for

non-ducted installation

- Transitions, duct, elbows, dampers, wall and roof caps.
- Make-up air damper 55557 or 55556 (optional)
Refer to page 5 for a complete list of venting options and
model numbers.
HR0045
Tape
Measure
HR0046
3/8"
Nutdriver
6
HR0050
Duct Tape
HR0049
HR0048
Sabre Keyhole
-or-
Saw Saw