Vertiv LIEBERT GXT5-3KL620RT2UXL Guía De Instalación Rápida página 3

LIEBERT® GXT5™ UPS 208-V 3,000 VA
Quick Installation Guide
2. If necessary, use the LCD
display or a connected
computer to make any required
settings. (Refer to the User
Guide for configuration set up.)
3. Close all output breakers on
the rear of the UPS (or in an
external panel board, if used).
4. If external battery cabinets are
included, close the breakers on
the rear of each cabinet.
5. Power-on the UPS using the
Operation and Display Panel
(see the illustration on the
previous page) by pressing and
holding the power button until
the confirmation dialog
appears. Use the Up/Down
arrows to select "YES", then
press Enter.
NOTE: During operation, the UPS
may sound an alarm as the output
receptacles are powered. You may
press the Esc button for 2 seconds
to silence the audible alarm.
SL-70377_REV1_9-19
3